PCT-212/213/214/215 Pack of 40 compact lever nut terminal blocks Assortment of cable connectors

General Description

This pack of 40 compact lever nut terminals is designed to simplify wiring while ensuring a secure connection. Made from flame-retardant PA66 nylon, these terminals offer resistance to corrosion and aging, with a 4 kV voltage rating and protection against electric shock.

These innovative connectors reduce wiring time by more than 70% compared to traditional methods.

Technical Specifications

Wire Cross-Section: 0.08 ~ 4.0 mm² (fixed), 0.08 ~ 4 mm² (stranded)

Rated Voltage: 250V / 600V

Rated Current: 32A

Internal Material: PA

Guide Strips: Electrolytic Copper (Surface Tin Plating)

Spring: Nickel-Chromium Alloy Steel

Package Contents: 10x 2-Port Cable Connector, 10x 3-Port Cable Connector, 10x 4-Port Cable Connector, 10x 5-Port Cable Connector

Installation

Open the Wire housing at 9 to 10 mm.

Push the orange lever to 90°.

Connect the wires.

Press the lever to close the clamp.

Use

These connectors are suitable for solid copper cables from 0.08 to 2.5 mm² (28-14 AWG) and stranded hard copper wires from 1.5 to 2.5 mm² (16-14 AWG). They are also suitable for stranded soft copper wires from 0.08 to 4 mm² (28 to 12 AWG). They are widely used in building wiring, particularly for controlling multiple lights with a single switch.

Other information

Each independent shrapnel at the junction allows for the separate handling of different wires.

A test hole on each cage surface facilitates electrical testing without removing the tape.

The connector is reusable but not suitable for other cable sizes.

If the cable diameter is too small, the lever nut may not be stable enough.