PEI spring steel bed platform, 3D printed, magnetic rubber construction plate, 220x320mm, for Voron

Features:1. Spring Steel and Magnetic Base: The PEI build plate is made of spring steel with a strong magnetic base. It attaches to the build plate by tearing off the backing paper and then aligning the plates.
2. High Compatibility: The PEI spring steel platform measures 220 x 320 mm or 9 x 13 inches, suitable for Voron and other models.Ensures perfect compatibility between your printer and build plate.
3. Double-Sided Printing Support: The PEI spray-coated spring steel platform is double-sided, and both sides can be printed on. Simply place it on the heated bed, tear off the protective film, and print directly. No glue is needed.
4. High temperature resistance of 260℃: good flatness, the PEI spray-coated spring steel platform has a high temperature resistance of 260℃, with no deformation.
5.Flexible and Removable: The PEI material of this 3D printing magnetic plate allows your print to easily adhere to the printing surface; it is flexible and detachable.
Specifications:Item Type: Spring Steel Magnetic Platform
Material: PEI Spray Powder, Spring Steel, Soft Magnet
Size: Approx.220 x 320 mm / 9 x 13 inches
Use: Good accessory tool for 3D printers
PEI Spray Thickness: Approx.0.25 mm / 0.01 in
Spring Steel Plate Thickness: Approx.0.4 mm / 0.02 in
Magnetic Rubber Plate Thickness: Approx. 1.2 mm / 0.05 inches
Total thickness: approx.2 mm / 0.08 inches

How to use:Direct installation and use.
Package list:1 x Spring steel construction platform 1 x Magnetic rubber plate
Note:The side with PEI should be printed facing up.Remove the protective film from the surface before printing.