Pet ID reader – High-brightness OLED screen – Wireless reading up to 15 cm – USB 2.0 rechargeable

General Description

This pet ID reader is an essential tool for pet owners concerned about their companions' safety.

Thanks to its wireless reading technology, it allows for the rapid display of pet information.

Equipped with a high-brightness OLED screen, it is easily readable even in bright sunlight.

This device is widely used for animal management, resource management, and railway detection.

Technical Specifications

Frequency: 134.2 kHz, 125 kHz Reading Standards: FDX-B (ISO11784/11785), EMID Reading Distance: > 15 cm for 30 mm ear tags, > 5 cm for 2 x 12 mm glass tags Reading Time: < 100 ms

Screen : 0.91 inches Communication Method: USB 2.0

Operating Temperature: -10℃ to 50℃ Storage Temperature: 30℃ to 70℃

Power Supply: 3.7V Li-ion Battery

Installation

The pet microchip scanner must be injected under the animal's skin by a professional using a dedicated syringe at a 45° angle.

Recommended implantation locations include: Dogs and cats: root of the ear or side of the neck Cranes, donkeys, swans: front center of the neck Takin: center of the left side of the neck, near the base of the ear

Operation

To use the reader, follow these steps: Press the button to start the device and enter scanning mode.

Place a label in the antenna loop and press the button to read it.

Press the button to read the next label.

The device will automatically turn off after 180 seconds of inactivity, or you can turn it off manually by pressing and holding the button for 3 seconds.

Other Information

Historical data can be read in internal read mode.