Pet ID reader, portable, rechargeable RFID chip scanner for pets

General Description

The pet ID reader is an indispensable tool for pet owners who care about their beloved animals' safety. Thanks to its wireless reading technology, it allows for the quick display of pet identification information. Equipped with a bright OLED display, it is easily readable even in bright daylight. This reader is compatible with FDX-B (ISO11784/11785) and EMID microchips and is widely used in animal husbandry, resource management, and railway monitoring. Technical Specifications: Frequency: 134.2 kHz, 125 kHz; Reading Standard: FDX-B (ISO11784/11785), EMID; Reading Distance: > 15 cm for 30 mm ear tags, > 5 cm for 2 x 12 mm glass tags; Reading Time: < 100 ms; Screen: 0.91 inches; Communication Method: USB 2.0; Operating Temperature: -10 °C to 50 °C; Storage Temperature: 30 °C to 70 °C; Power Supply: 3.7 V Li-ion battery

Installation

The pet microchip scanner must be implanted by a professional using a special syringe at a 45° angle. The recommended implantation sites are:

Dogs and cats: base of the ear or side of the neck

Cranes, donkeys, swans: front of the neck, middle of the neck

Takins: middle of the left side of the neck, near the base of the ear

Application

How to use the reader:

Press the button to start the device and enter scan mode.

Place a chip in the antenna loop and press the button to read.

Press the button to read the next chip.

If no chip is detected, the device will automatically turn off after 180 seconds. Alternatively, you can turn it off manually by pressing and holding the button for 3 seconds.