Pet ID Reader, Rechargeable Pet ID Scanner Tag Display, Portable RFID EMID Reader for A

Product never used, packaging damaged during transport. Product unopened, repackaged in our warehouses, in perfect working order, warranty available. Pet Microchip Reader: Are you still worried about losing your pet? Are you still worried about not recognizing your pet? This ID reader is your best assistant; it can help you quickly view your pet's information. Using the high-brightness screen, it can be clearly seen in bright light. This ID reader is a microchip reader that adopts wireless identification technology and supports reading FDX-B (ISO11784/11785) and EMID microchips. It uses a high-brightness OLED display screen, which can be clearly seen under strong light. Widely used for animal management, resource management, railway detection, etc. Recognition frequency: Rechargeable via USB interface. Alarm when the built-in battery is low. Frequency: 134.2 kHz, 125 kHz. Reading distance: > 15 cm for 30 mm ear tags, > 5 cm for 2 x 12 mm glass tags. EASY TO READ INFORMATION Supports reading FDX-B (ISO11784/11785) and EMID microchips. Widely used for animal management, resource management, railway detection, etc. EASY TO RECOGNIZE As soon as the chip is attached to the animal, it can easily read the information. The pet ID chip reader stores up to 128 tag entries, and you can download this information to a computer via a USB cable. RFID Reader User Manual 1. Press the pet microchip to turn on the device, enter scanning mode, and begin scanning the pet with the microchip scanner. 2. Once the tags are scanned, the reader will enter sleep mode. 3. Place a tag in the antenna loop and press the button to read it. 4. Press the button to read the next tag. 5. If no tags are scanned, the device will automatically turn off after 180 seconds, or you can press and hold the button for 3 seconds to turn it off. the device. Specification:Frequency: 134. 2kHz, 125kHzReading Standard: FDX-B (ISO11784 / 85), EMIDReading Distance: >15cm for 30mm ear tags, >5cm for 2*12mm glass tagReading Time: <100ms. Screen: 0. 91inCommunication Method: USB2. Working Temperature: -10℃-50℃ Storage Temperature: 30℃-70℃ Power Supply: 3V 7V Li-ion battery For pet professionals Providing animal registry products and professional resources How to Use :The pet microchip scanner is injected directly into the animal's skin by a professional using a dedicated syringe and implanted at a 45° horizontal angle. Approximate implant placement: Pet dog, cat: Root of the ear or both sides of the neck. Cranes, donkeys, swans: The front center of the neck. Takin: The center of the left side of the neck, near the base of the ear. Marking positions for other wild animals of similar morphology are mentioned. above. The portable reader has a backlit screen for easy reading. Historical data can be read in internal read mode. Historical data can be read in internal read mode.