1/4

Pet ID Reader, Rechargeable Pet Microchip Scanner Tag Display, Portable RFID EMID Pet Reader

~~£65.29~~

Of which environmental contribution £0.10 including VAT.

Sold by Sinocor GmbH

Product information

Description

General Description

This pet ID reader is an essential tool for pet owners concerned about their companions' safety. Thanks to its wireless reading technology, it allows for the rapid display of pet information. Equipped with a high-brightness OLED screen, it is easily readable even in bright sunlight. This device is widely used for animal management, resource management, and railway detection.

Technical Specifications

Frequency: 134.2 kHz, 125 kHz
Reading Standards: FDX-B (ISO11784/11785), EMID
Reading Distance: > 15 cm for 30 mm ear tags, > 5 cm for the 2 x 12 mm glass label
Reading time: < 100 ms
Screen: 0.91 inches
Communication method: USB 2.0
Operating temperature: -10℃ to 50℃
Storage temperature: 30℃ to 70℃
Power supply: 3.7 V Li-ion battery

Installation

The pet microchip scanner must be injected under the animal's skin by a professional using a dedicated syringe, at a 45° angle. Recommended implantation locations include:

Dogs and cats: root of the ear or side of the neck
Cranes, donkeys, swans: front center of the neck
Takin: center of the left side of the neck, near the base of the ear

Usage

To use the reader, follow these steps:

Press the button to start the device and enter scanning mode.
Place a tag in the antenna loop and press the button to read.
Press the button to read the next tag.
The device will automatically turn off after 180 seconds of inactivity, or you can turn it off manually by pressing and holding the button for 3 seconds.

Other information

Pet Microchip Scanner

History data can be read in internal read mode.