Pet ID Reader, Rechargeable Pet Microchip Scanner Tag Display, Portable RFID EMID Reader for Pets, TRIMEC

General Description: The TRIMEC pet ID reader is an essential tool for pet owners concerned about their companions' safety. Thanks to its wireless reading technology, it allows for the quick display of pet identification information. Equipped with a high-brightness OLED screen, it is easily readable even in direct sunlight. This reader is compatible with FDX-B (ISO11784/11785) and EMID microchips and is widely used for animal management, railway detection, and other applications. Technical Specifications: Frequency: 134.2 kHz, 125 kHz; Reading Standard: FDX-B (ISO11784/11785), EMID; Reading Distance: > 15 cm for 30 mm ear tags, > 5 cm for 2 x 12 mm glass tags; Reading Time: < 100 ms; Screen: 0.91 inches; Communication Method: USB 2.0; Operating Temperature: -10℃ to 50℃; Storage Temperature: 30℃ to 70℃; Power Supply: 3.7V Li-ion battery. Installation: The pet microchip scanner must be implanted by a professional. using a dedicated syringe, at a 45° angle. Recommended implantation locations include: Dogs and cats: root of the ear or side of the neck; Cranes, donkeys, swans: front center of the neck; Takin: center of the left side of the neck, near the base of the ear. To use the reader, follow these steps: Press the button to start the device and enter scanning mode. Place a tag in the antenna loop and press the button to read. Press the button to read the next tag. If no tag is detected, the device will automatically turn off after 180 seconds, or you can turn it off manually by pressing and holding the button for 3 seconds. Other information