Pet Microchip Reader, Microchip Detector, RFID Chip Reader, 134.2KHz/125KHz Portable Chip Scanner with OLED Display for ISO11784/11785/FDX-B/EMID Readers

【Pet Microchip Reader】Utilizing advanced high-frequency RFID technology, the read response time is less than 100ms. The device has its own memory function and can store up to 128 tag entries, which can be downloaded to a computer via the USB data cable.

【Multiple Protocol Support】The pet microchip reader supports ISO11784/ISO11785/FDX-B (15-bit)/ID64 RFID and EMID chips. (AVID chip not supported) The reading range is approximately 0 to 25cm or more.

【Built-in Lithium Battery】The pet microchip reader has a built-in 800mAh lithium battery, eliminating the need for battery replacement. It is easy to use and can be charged via a USB interface.

When fully charged, it can operate continuously for 6 hours. The operating temperature is -10℃~50℃, and the storage temperature is -30℃~70℃. [Contactless Card Reading] Adopting advanced high-frequency RFID technology, the detection distance is longer. Glass tube tags from 2~12mm are detected up to 8cm, and pet ear tags from 30mm are detected up to 20cm (refer to the tag's performance specifications). The reading response time is less than 100ms and the induction is sensitive, which improves productivity; it is easy to use and powerful. [OLED Screen] The pet microchip reader uses a high-brightness 0.91-inch OLED screen, which can be viewed clearly in bright conditions indoors or outdoors, and features a buzzer.