pieces 6004-2RS Ball Bearing 20x42x12mm with rubber seal and chrome steel, 6004RS deep groove sealed ball bearing

6004-2RS (ID = 20mm, OD = 42mm, thickness = 12mm)

6004 2RS bearings are shielded on both sides to retain lubricant.

Made of carbon steel for durability and resistance to deformation under heavy loads.

ABEC 1 (P0) tolerance, Z2 noise level for most general applications.

5050 newton static load and 9400 newton dynamic load.

Product Description

Description:

Normal single-row precision, pre-lubricated.

Deep groove ball bearings are one of the most widely used types of bearings.

They are used to support radial and axial loads in both directions. With low friction and high speed, ball bearings are cost-effective and require little maintenance. Carbon steel bearings are tougher than chrome steel bearings after hardening. These economical bearings are widely used in areas with low Mohs hardness requirements. Suitable for all kinds of industrial equipment, micro-machines, small rotary machines, office equipment, etc. Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protects against dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of nitrile butadiene rubber reinforced steel sheet (resistant to oil and liquids). Lower speed limit than shield bearings.

Specifications:

Model: 6004-2RS

Seal Type: Shielded

Inner/Outer Race Material: Carbon Steel

Cage Material: Stamped Steel

Inner Diameter (d): 20mm

Outer Diameter (D): 42mm

Thickness (B): 12mm

Dynamic Load Capacity (Cr): 9400N

Static Load Capacity (Cor): 5050N

Accuracy Class: P0 (ABEC-1)

Noise Level: Z2

Number of Packs: 4 pieces