Pieces M8 Ring Nut for Roof Rack, M820mm Square Bolts, T-Slot Fixing Anchors, Stainless Steel Ring Bolts, Eyelet Screws, Ropes, Guide Rails

HIGH-QUALITY MATERIAL: M8 eye nuts are made of high-quality 304 stainless steel, resistant to corrosion and rust. They remain stable even in humid environments and at high temperatures. Suitable for both indoor and outdoor use, they are ideal for DIY and industrial applications. EASY INSTALLATION: Hammerhead bolts with a 20x20x4 mm base facilitate quick rail fastening and connection. The eye nuts simplify hanging. Tips: 1. Check the correct size of the rail and hammerhead bolt to ensure proper installation. 2. Avoid overtightening to prevent damaging the nut or breaking the bolt. FLEXIBLE USE: Equipped with 18 mm long M8 hammerhead bolts and washers, you can flexibly adjust the thread length. These T-bolts fit perfectly on most roof racks with T- or C-rails, allowing for easy installation to securely attach bungee cords, cargo nets, and similar items. SECURE DESIGN: The eye bolts have a precise, deep thread that won't slip when tightening or turning. The smooth, burr-free surface, even force distribution, and high strength prevent potential safety hazards. With a maximum load capacity of 230 kg, they allow for easy mounting and removal of hooks, steel chains, carabiners, etc., providing ample lifting or suspension capacity. VARIOUS APPLICATIONS: The ring nut has a good load capacity and easily mounts/dismounts on hooks, steel chains, etc. Attached to various roof racks, truck beds, kayak rails, it allows you to lift heavy objects or create a secure anchor point. Widely used in various lifting, pulling, and force systems. The combination of eye nuts and hammerhead screws ensures a solid connection and guarantees a tight fit throughout the system. Their structural design ensures a balance of forces and improves overall stability. This design increases overall stability and reduces potential safety hazards, so you don't have to worry. The combination of eye nuts and hammerhead screws is suitable for a multitude of scenarios, including, but not limited to, interior decoration, gardening, construction sites, industrial installations, and more. Note: 1. Ensure that the hammerhead screws are the correct size for the corresponding guide rails to ensure proper installation. 2. Ensure that the nut is compatible with the object or device to be fastened, e.g., in terms of hole diameter, thread type, etc. 3. Do not exceed the nut's rated load capacity to avoid accidents. 4. Regularly check the nut's tightness to ensure it is secure but not overtightened. Specifications: Color: Black Nut Diameter: 6 cm Nut Thread: M8 Screw Size: M8*18 mm + Bottom 20 mm*20 mm*4 mm Package Contents: M8 Eye Nut x 4 M8*20 mm Hammer Head Screws x 4 Bracelet Washers x 4 Flat Washers x 8