Pieces Temperature Controller Module with Enclosure,XH W1209 Digital Display Thermostat Module with Waterproof NTC Probe

Specifications:
Dimensions: 48.5×40×15.8mm
Temperature Control Mode: ON/OFF
Temperature range: -50 - 110℃
Resolution: When the temperature is 0.1℃ , resolution is -9.9 to 99.9, other temperature segment is 1℃
Control precision: 0.1℃
Hysteresis accuracy: 0.1℃
Refresh rate: 0.5 s
High temperature protection 0 - 110℃
Supply voltage: 12V DC
Static current: less than 35mA, draw current less than 65mA
Output voltage: 12V DC
Output power: 20A relay
br> Measurement input: NTC waterproof sensor (10K 0.5%)
Environmental requirements: -10 - 60℃ Humidity: 20% - 85%

Instructions for use:
Connect power and equipment , the measurement temperature is displayed,
press the "SET" button, press "+ or -" to set the desired temperature (long press "+ or -" to quickly increase or decrease),
Press "SET" to confirm the setting and return, the controller will automatically run the ON/OFF relay.
The thermostat output is 10A relay, responds to a variety of high-power loads. LED indicator: LED off indicates that the relay is off; Lighting indicates the relay is closed.
Digital LED tubes: "LL" indicates the sensor is open, "HH" indicates over-range, the relay will be forcibly disconnected; "---" indicates high temperature alarm
Long press "SET" button to enter main menu settings,
Press "+ or -" to switch between P0-P6, then press long press "SET" or 10 seconds without keys to confirm the setting and return.
Return to factory settings ----- When power off, press and hold "+" "-" key. Then power on, it will show "888" to restore factory settings.

Package includes:
1 Piece 12V DC Digital Temperature Controller Board with Clear Acrylic Case