Pipe center finder, pipe feeding tools with centering head, pipe joining tools. Center finder for measuring pipe diameters greater than 0.5"

【Economic measurement tool】 This pipe marker centering tool is effective and useful for defining center lines, determining angles and markings for fittings, locating points inside pipes or tanks, organizing keyways, and calculating slope. It can measure tanks or pipes with a diameter of at least 1/2" or larger.【Easy to use】Step 1. Loosen or tighten the hex nut with the included hex Allen key. Step 2. Place the pipe marking tool on the pipe and find the desired angle. Step 3. Push the center column down to the fixed point position. Step 4. Tap with a hammer to leave a fixed point mark on the pipe.【Robust equipment】 The pipe fitting tool can wrap around the circumference of pipes for measuring and marking, and it is made of a highly flexible and heat-resistant sealing material. This pipe center finder tool is easy to use and an indispensable tool for pipe installers and welders.【Y-shaped head base with DSL】This central pipe safety finder features a 4-inch Y-type base equipped with an adjustable dial bubble extender (DSL). You can push the center column down to the desired fixed point position. It's a must-have on your pipe welding tool list.【Adjustable Dial Bubble Protractor】 Printed with an inch scale, an inch graph, and a tangent graph, this pipe fitting tool can help you draw straight lines around pipes. To judge horizontality, the green liquid bubble should be midway between two lines on the protractor.【Note:】When determining the angle, the bubble of green liquid should be in a horizontal position regardless of the angle.