Pipe cutter, ball bearing, adjustment knob, tube cutting type, aluminum hardware tool 4-28mm

Features:

1. Unique ball bearing structure design, flexible to use and easy to control cutting pressure. 2. Made of aluminum, it has the following characteristics: lightweight, high toughness, rust resistance, aging resistance, etc. 3. Highly hardened portable cutting blade, small cutting space, can cut iron pipes, etc. 4. Suitable for cutting thin-walled pipes such as copper pipes, aluminum pipes, PPR pipes, etc. 5. The cutting range is 4 to 28 mm, the volume is small and compact and it can be used in a small space.

Specifications:

Item Type: Pipe Cutter Material: Aluminum Alloy + Aluminum Model: ST-G428 Purpose: Cutting Total Length: Approx. 95 mm / 3.7 inches Width: Approx. 50 mm / 2 inches Blade Diameter: Approx. 20 mm / 0.8 inch Cutting range: approx. 4-28 mm / 0.2-1.1 inch Applicable pipe type: used for cutting thin-walled pipes such as copper pipes, aluminum pipes, PPR pipes, etc.

How to use:

1. Place the pipe between the roller and the cutting wheel. The side wall of the pipe is firmly fixed in the middle position of the two rollers, and the cutting wheel is clamped perpendicular to the pipe. 2. Next, turn the adjustment handle so that the cutter blade cuts the pipe wall, then rotate the cutter evenly around the entire pipe. 3. After one rotation, turn the adjustment handle so that the cutting blade cuts further into the pipe. The amount of cutting should not be excessive at a time; simply turn the handle 1/4 turn, then continue rotating the blade, and then tighten the edge until the pipe is cut.

4. The opening of the cut pipe must be clean and smooth, suitable for the pipe's expansion. Package List: 1 x Pipe Cutter