Plastering gun with 6L cup, 3 nozzles, pneumatic paint gun, Plaster-LIAIKI

Plaster Gun with Cup and 3 Nozzles

The air pressure required for spraying comes from a compressed air supply. This gun is perfect for large surfaces. A large, sturdy plastic hopper provides ample capacity for easily and effortlessly spreading plaster, plastic blocks, wood chip wallpaper, reinforced plaster, quartz sand plaster up to 6 mm, dry quartz plaster up to 8 mm, plaster, interior and exterior plaster, and more.

The plastic bucket has a convenient handle, a 6-liter capacity, and a half-moon opening (slot). Therefore, the unit can also be used at a slight angle, allowing you to achieve neat and clean coating results on walls and ceilings.

The pneumatic suction cup guns should be used at a pressure of 4 to 8 bar.

We recommend using a compressor with an air volume of at least 200 l/min; the required air volume is between 227 and 396 l/min. The plaster gun is equipped with a 13.2 mm (¼") compressed air connection. The air shut-off valve allows you to adjust the air pressure. The sturdy, ergonomic handle and long trigger allow you to guide the gun easily and comfortably. The versatile plaster gun comes with three interchangeable nozzles: Ø 4.6 mm (3/16"), Ø 6.3 mm (1/4"), and Ø 8 mm (5/16"). The plaster gun is detachable and easy to clean.