PN532 / PL2303HX NFC Reader Module for - High-Performance Card Reader with I2C SPI UART Support

Specification

Features:

PN532:

1. The PCB is small and easy to integrate into your project.

2. Supports I2C, SPI, and HSU (High-Speed UART), switch between these modes.

3. Supports reading and writing, P2P communication with peers, and NFC mobile phones.

4. The typical working distance has been updated to a reading distance of 5 cm ~ 7 cm.

5. Works in NFC mode or reader mode.

6. Reader support:

. 1K, 4K, Ultralight, and Desfire cards.

n ISO/IEC 14443-4 cards, such as CD97BX, CD Lamp, Desire, P5CN072 (SMX).

c. Innosion jewelry cards, such as the IRT5001 card.

d. Felica cards, such as RCS_860 and RCS_854.

7. Plug and Play Compatible.

8. Integrated PCB antenna, communication distance 4 cm ~ 6 cm.

9. On-board level converter, I2C and UART Standard 5V TTL, 3.3V TTL SPI.

10. Works as a reader.

11. Works as a 1443-A card or virtual card.

12. Data exchange with other NFC devices, such as smartphones.

PL2303HX:

1. TTL COM PC-PL2303HX chip.

2. Standard 4-pin male and TTL connector.

3. Simple and easy-to-use design to provide USB support for your project.

4. Suitable for Windows XP, 2003, and Vista 7. Specification: PL2303hx Long Line Definition: Black Wire - GND Green Wire - SCL White Wire - SDA Red Wire - VCC PL2303HX LINE CONTROL DEFINITION: GND-GND, VCC-5.0V, SDA-RXD, SCL-TXD Weight: Approx. 55g / 1.9oz Package List: 1