Pneumatic texture gun, 1.58 gallon drywall paint sprayer with 3 nozzles (4.0 mm/6.0 mm/8.0 mm) for walls and ceilings

✔️Plastering gun with nozzle and 3 nozzles ✔️An essential tool for all renovation and plastering work: ✔️The air pressure required for spraying comes from a compressed air supply. This gun is ideal for large work surfaces. Its robust plastic hopper offers a large capacity for easily applying materials such as plaster, plastic coatings, woodchip wallpaper, reinforced plaster, quartz sand plaster up to 6 mm thick, dry quartz plaster up to 8 mm thick, sealants, and interior and exterior plasters. ✔️The plastic nozzle has a convenient handle and a 6-liter capacity. Its crescent-shaped opening (notch) allows the gun to be used at a slight angle, for clean and precise plastering on walls and ceilings. ✔️Pneumatic plastering guns with nozzles must operate at a pressure of 4 to 8 bar. We recommend using a compressor with an air flow rate of at least 200 liters/minute; the required air flow rate is between 227 and 396 liters/minute. The plastering gun is equipped with a 13.2 mm (¼") compressed air connection. An air shut-off valve allows for adjusting the air pressure. The ergonomic and robust handle, with a long trigger, allows for easy and comfortable control of the gun. ✔️This versatile plastering gun is equipped with three interchangeable nozzles: Ø 4.6 mm (3/16"), Ø 6.3 mm (1/4"), and Ø 8 mm (5/16"). ✔️The plastering gun can be disassembled for easy cleaning.