Pool hose support (2 pieces), pool hose supports, above-ground pool accessories, pool accessories, anti-sagging hose accessory (grey)

Please check the model number before purchasing. Dimensions: 9.9 x 8.9 cm. The pool hose holder comes with hose clamps and hose clips for hoses with a diameter of 3 to 3.7 cm. Its adjustable design makes it easy to adjust and prevents leaks. Deformation-resistant: The gray fixed tube is made of ABS plastic, which is sturdy and resistant to deformation and breakage. The hose clamp is made of upgraded stainless steel, easy to open by twisting, reliable, and rust-resistant for long-lasting use. A small hole at the bottom allows the hose clamp to pass through for better hose securing. An upgraded tension strap is also attached for a more stable double fastening. Easy to use: First, block the water outlet to prevent water from flowing out. Then, remove the hose to install the bracket. Glue the bracket to the pool wall with the included adhesive. Place the hose onto the bracket, then secure it with cable ties and hose clamps. No complicated tools are required. Security: The water inlet or outlet must be connected to the pool and pump using a hose. Sometimes, the water pressure is too high for the hose to sag, which can prevent the water inlet and pump from cracking the water outlet. In this case, using our hose bracket can solve the problem and ensure a secure connection. WIDE APPLICATIONS: The pool hose bracket can reduce pressure on the inlet or outlet filter wall. It can be used in swimming pools, bathtubs and spas, and meets a variety of needs.