Portable gate/garage door remote controls – 3-pack 868.3 MHz transmitters compatible with HSE-4, HS4, HSS4, HSP4 and other BS models.

Compatibility: Our replacement garage door opener is compatible with Hörmann hand transmitters HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, and HSS4-868-BS. Note: If your original remote control is not listed, please do not purchase this product. This remote is not your original remote control, but a replacement garage door opener. Two programming methods are available: Copy the code from your original remote control or program it via the receiver. Note: Integrated scrolling codes (blue LED) are included! If your original remote control uses fixed codes (red LEDs), this one will not work. Garage door remote control frequency: 868 MHz, blue LED indicator, 4 channels. Not compatible with remote controls of other frequencies, even if they appear identical. Mini 4-button hand transmitter (BS) – with a protective metal cap to prevent accidental pressing. Small enough for a keychain, pocket, or backpack. Compatibility: Our replacement remote control for garage door openers is compatible with Hörmann hand transmitters HSE4-868-BS, HSE2-868-BS, HSE1-868-BS, HS5-868-BS, HS4-868-BS, HS1-868-BS, HSP4-868-BS, and HSS4-868-BS. Note: If your original remote control is not listed, please do not purchase it. This is not the original remote control, but a replacement remote control for your garage door opener. Two programming methods: Copy the code from your original remote control or program it via the receiver. Note: Integrated rolling codes (blue LED)! If your original remote control uses fixed codes (red LED), this remote will not work. Garage door remote control: 868 MHz frequency, blue LED indicator, 4 channels. Not compatible with remote controls of other frequencies, even if they look identical. Portable mini transmitter with 4 buttons – with a protective metal cover to prevent accidental presses. And it's so small that it can easily be carried on your keychain, in your pocket, or in your backpack.

"
Note: Integrated rolling codes (blue LED)!
If your original remote control uses fixed codes (red LED), it will not work.
Compatible models:
For Hörmann HS1-868-BS.
For Hörmann HS4-868-BS.
For Hörmann HS5-868-BS.
For Hörmann HSE1-868-BS.
For Hörmann HSE2-868-BS.
For Hörmann HSE4-868-BS.
For Hörmann HSP4-868-BS.
For Hörmann HSD2-868-BS.
For Hörmann HSS4-868-BS.
Programming:
1) Press and hold the button on the new remote control whose code you want to program. 2) Press and hold the button on your original remote. Press a button on your new remote, then press another button three times until the red LED lights up for 10 seconds. Release all buttons. 2) Place your original remote as close as possible to the left side of your new remote. 3) Press the button on your original remote. You need to copy the code until the LED flashes red and blue alternately. Check if the LED on your new remote flashes blue. If not, try holding your new remote as close as possible to your original remote. 4) When the blue LED on your new remote flashes rapidly, the learning process is complete. Release all buttons. 5) Repeat this process for the remaining buttons. Reset Method: Each button on your remote will be assigned a new radio code by following these steps: (1) Remove the battery for 10 seconds. (2) Press a button. your new remote control. Press and hold the button. (3) Insert the battery. The LED will light up and blink slowly blue for 4 seconds. The LED will blink quickly blue for 2 seconds. The LED will then glow solid blue. (4) When you release the remote control button, all radio codes will be reassigned. Note: If you release the remote control button too soon, no new radio codes will be assigned.