Portable magnetic induction heater, rusted screw nut, electromagnetic, 1500W, EU plug, 220V, 8A

Features:

1. [High Efficiency] Induction heating uses an electromagnetic field to heat metal, making it faster, more precise, and more efficient. No open flame is produced during heating, ensuring a safe working environment.
2. [High-Brightness LED Work Area] The induction heater has a built-in LED light at the tip, providing illumination of the work area even when working in the dark. This allows you to see the progress of your work and monitor the status of the object being heated.
3. [Case and 3 Coils] The magnetic induction heater kit comes with its own sturdy and durable case, making it easy to take with you when working outdoors. Equipped with 3 different coil sizes, 3 coils included: 1 piece 0.79 in (20 mm) in diameter, 1 piece 0.98 in (25 mm) in diameter, and 1 piece 1.18 in (30 mm) in diameter.
4. [3.0 mm Brass Core] The induction coil heating kit is made entirely of brass wire with a 3.0 mm brass core, which is more reliable than the 2.5 mm brass core coils on the market and can heat up to 800 ℃ for extended periods with good energy-saving properties.
5. [Cooling System] The magnetic induction heater is equipped with a cooling fan and overheat protection to heat without damaging nearby heat-sensitive components, and the improved thermally stable thermoplastic housing enhances both internal and external durability.
6. [Widely Used] The magnetic induction heater is primarily used to heat rusted nuts and bolts to loosen them. It can also be used for heat treatment of automobiles, machinery, and various small metal parts such as gears, pulleys, bearings, etc.

Specifications:

Item Type: Electromagnetic Induction Heater
Material: Flame-retardant ABS, Brass
Energy Saving Effect: Energy saving up to 30% or more
Operating Frequency: 50-60 Hz
Rated Power: 1500 W
Heating Temperature: 800 ℃
Heating Time to 800 ℃ Required: 5 to 30 seconds (the larger the object, the longer the time required)
Heating Bolt Diameter: The coil can be adjusted freely
Ambient Temperature: -40-60 °C
Relative humidity: Atmospheric pressure: 86KPa-100KPa
Function:
1. With soft start function, for long service life in case of frequent starts
2. With IGBT overcurrent protection function
4. IGBT overheat protection function
5. Heating coil short circuit protection function
6. Heating coil open circuit protection function
7. Full bridge series resonant circuit topology, strong anti-interference capability
8. Uses a high-performance IGBT driver chip driver, accurate reading and output waveform
9. Automatic identification of the load function and phase locking, so that the load side obtains a high power factor, but also to control the circuit in the low inductive zone with high efficiency. 10. Several electromagnetic heating controllers are installed in parallel on the same heating tube, without interfering with each other. 11.Good energy-saving effect: Compared to current electric heating coils, energy savings of up to 30% or more.
12. Easy to install, can be connected to barrel-type and flat-plate type induction coils.

How to use:

Remove the product, install it, and then use it.

Package list:

1 x Induction heater

3 x Heating coils

2 x Screws

1 x Storage box

1 x Instruction manual