ARCACOLOUR - powder dyes ARCACOLOUR to tint concrete and cement-based mortars | Black - 500 g

Reference: ME1372145

In stock

View full description
£9.09

Delivery from £40.00

Available models:
£9.09

Delivery from £40.00

Orders over £0.00 with this seller qualify for free delivery


Quantity:
- +

Uh oh…it's not possible to order less than 1 unit of this product.

Sorry, you can only order up to 9998 units of this product!

Secure payment by debit or credit card

Available delivery options:
  • Standard delivery in 5 to 6 working days (P&P starting at £40.00)

Delivery to the British Isles only (UK, Jersey and Guernsey)

Sold by: ARCANE INDUSTRIES

 ARCACOLOUR - powder dyes ARCACOLOUR to tint concrete and cement-based mortars | Black - 500 g
£9.09

Description

Product Detail

POWDER DYES ARCACOLOUR
TINT CONCRETE - CEMENT BASED MORTARS

The powder dyes ARCACOLOUR are used to tint concrete and cement based mortars.

ARCACOLOUR can be used on screed mortars, re-pointing mortars, concrete slabs, aesthetic concrete, plaster coatings and lime-based plaster...

ARCOLOUR creates a natural colourful design finish on cement and concrete. Easier to achieve a fuller colour range when mixing with white cementitious powder, it will also dye grey concrete and cement powders.

ARCACOLOUR gives a decorative touch to cement and concrete and ARCACEM, our waterproofing tanking product designed to waterproof basements and underground structures.

2 pack sizes: 500 g and 4 kg

A decorative touch for all your concrete, cement or mortar surfaces.

Use with ARCACEM to tint your walls and floors and waterproof your rooms at the same time!

ARCACOLOUR is available in 2 pack sizes: 500 gr and 4 kg

When mixed into ARCACEM, our waterproofing tanking product designed to waterproof basements and underground structures, water reservoirs, tanks, vats and planter boxes or ARCACEM S2, used to waterproof over or underneath tiling, ARCACOLOUR gives a decorative touch to the cementitious product.

Use ARCACOLOUR on screed mortars, re-pointing mortars, concrete slabs, aesthetic concrete, plaster coatings and lime-based plaster...

With ARCOLOUR you can create a natural colourful design finish on cement and concrete. ARCACOLOUR mixes with white and grey concrete and cement powders (it is easier to achieve a fuller colour range when mixing with white).

Note: the pigments are UV sensitive and should be used in areas protected from bright sunlight or the colours will fade over time.

Benefits

Mixes in and tints a wide variety of surfaces to the colour of your choice:

  • concrete slabs
  • poured concrete
  • screed mortars
  • re-pointing mortars
  • aesthetic concrete
  • plaster
  • lime-based plaster
  • cement
  • Arcacem and Arcacem S2

Note: the pigments are UV sensitive and should be used in areas protected from bright sunlight or the colours will fade over time.

How To Apply

Instructions for use ARCACOLOUR

Product Preparation
ARCACOLOUR powdered dyes are mixed to the dry ARACEM or cement powder before adding water or any other additives.
To avoid reducing the mechanical performance of the cementitous coating, the powder dye must not exceed:

  • 5% of the total weight of the cement or
  • 3% of the total volume of the mixture ARCACEM + ARCACOLOUR (dry and liquid parts)

Application - Tinting Cement
Mix the dry powder dye ARCACOLOUR to the dry cement and aggregates. It is preferable to use white cement (instead of grey) to obtain the best results.

Application - Tinting ARCACEM or ARCACEM S2
Using a spatula, slowly mix the dry powder dye ARCACOLOUR into the dry ARCACEM or ARCACEM S2 cement power.
The proportion of ARCACOLOUR used should be tested beforehand to obtain the desired tint.
It is essential that the dry products be mixed uniformly. Once mixed, the powder should be a consistent colour and have no lumps. A careless mixing of the 2 dry products may leave darker colour trails when applied.
Mix the dry component obtained, (ARCACEM/ARCACEM S2 + ARCACOLOUR) to the resin.
Mix manually or with an electric mixer (4 to 600 T/minute) until you obtain a homogeneous paste.

Storage
Store in a dry area.

ARCACOLOUR

The quantity of the dye added to your cement or mortar must not exceed 5% of the total weight.
When tinting ARCACEM or ARCACEM S2, the quantity must not exceed 3% of the total weight.

The dye will not modify the drying time of the cement or mortar it is being mixed into.

Water

Coverage Rate

ARCACOLOUR

The quantity of the dye added to your cement or mortar must not exceed 5% of the total weight.
When tinting ARCACEM or ARCACEM S2, the quantity must not exceed 3% of the total weight.

1 DIY reviews by customers

Average rating: 5/ 5

Full star Full star Full star Full star Full star (1)

Customer evaluations

5 stars

100 %

4 stars

0 %

3 stars

0 %

2 stars

0 %

1 stars

0 %

1 Reviews

Order by
Newest Oldest Highest rated Lowest rated Most upvoted
Hide 1 translated reviews
Profile Image pierre.b 1 reviews given 0 upvotes
Bought on 27/11/2019 Published on 07/12/2019

Originally published on ManoMano.fr and translated by Google - See original review
Originally published on ManoMano.fr and translated by Google - See original review
Fast shipping, metal packaging for good conservation. Perfect.

What do our customers say about us and our sellers?