Premium Stainless Steel Studs for Worx Landroid S/M Lawn Mower 2mm Thickness, Improved Traction - Polished Deburring - Wheel Diameter: 205mm

Improve traction - With our Worx robot lawn mower spikes, there are no more holes in the lawn, it is easier to ride on hills, and it does not slip on rainy days. 205 mm in diameter and 2 mm in thickness.

Stainless steel material - Our Worx robot lawn mower spikes are made of 304 stainless steel and polished in an additional production step to achieve a perfect appearance. All edges of the Worx Traction Enhancer are deburred.

Premium Phillips Head Screws - 4 x 20mm stainless steel Phillips head screws ensure easy mounting of the mower spikes, and the recessed screw holes allow for a snug fit, so the lawnmower wheels won't get caught by the screw heads.

Compatible with all S and M models (not for 2021 models) S300 [WR130E], M500 [WR141E], M700 [WR142E], M1000 [WR143E], S450i [WR101 SI], S4. 50i [WR102SI], S450i [WR106SI], S700i [WR101 SI], M800i [WR111MI], M800i [WG757E], M900 [WG758E], M1000i [WG796E.1], M50. 0 2.0. [WR165E], M700 2.0 [WR167E]

Quality Service – Your satisfaction is our goal. We offer 100% after-sales service for our robotic lawnmower nails.

Product Description

Spikes for Worx S&M models

The high-quality stainless steel spikes provide much better traction for your robotic lawnmower.

On wet surfaces, steep terrain, or difficult terrain, the robotic lawnmower can get stuck and dig unsightly holes in the lawn.

With our spikes, this is a thing of the past.

Stainless steel material and high-quality Phillips screws

Our Worx robotic lawnmower spikes are made of stainless steel and polished in an additional production step to achieve a perfect appearance. All edges of the Worx Traction Enhancer are deburred.

4 x 20 stainless steel Phillips screws ensure easy assembly of the robotic lawnmower spikes, and the countersunk screw holes allow the screws to be perfectly seated so that the robotic lawnmower wheels are not pinched by the screw heads.

ASSEMBLY INSTRUCTIONS

Mounted on the outside of the tire

Tools required:

Cross drill bit

1.5 mm drill bit (optional)

Assembly instructions

Place your Worx Landorid vertically so that the left or right tire is facing upwards. Place the studs on the wheel and center them. It is now possible to pre-drill holes with a 1.5 mm drill bit. Then use the included stainless steel screws to secure the studs to the tire.