Pressure Transducer Stainless Steel Sender Sensor for Oil Air Water (100 PSI)

Features: 1. This is an advanced pressure transducer compared to traditional mechanical pressure transducers. 2. ±2% FS small output error, including non-linear error, hysteresis error, and repeatability; full temperature range. 3. Lightweight and small in size, easy to install and use. 4. It has complete overvoltage protection. 5. Works for oil, fuel, diesel, gas, water, and atmospheric pressure; can be used in oil tanks, gas tanks, diesel tanks, etc. Specifications: Features: This is an advanced pressure transducer compared to traditional mechanical pressure transducers. Small output error ±2% FS, including non-linear error, hysteresis error, and repeatability; full temperature range. Lightweight and small in size, convenient to install and operate. It has complete overvoltage protection. Works for oil, fuel, diesel, gas, water, air pressure, can be used in an oil tank, petrol tank, diesel tank, etc. Specifications: Material: Stainless steel; Voltage: DC 5V; Pressure: 30 psi, 100 psi, 150 psi, 200 psi, 300 psi, 500 psi (optional); Thread type: 1/8" NPT; Input: 0-30 psi; Output: Linear voltage output 0.5V~4.5V. Outputs: 0 psi 0.5V, 15 psi 2.5V, 30 psi 4.5V. Accuracy: Within 2% of reading (full scale). Thread: 1/8"-27 NPT. Wiring connector: Waterproof quick disconnect. The corresponding connector is included. Wiring: red for +5V; Black for ground; Blue for signal output. 100 psi Input: 0-100 psi Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V. Accuracy: to 2% of reading (full scale). Thread: 1/8"-27 NPT Wiring connector: Waterproof quick disconnect. Mating connector and wiring harness (pigtail) are included. Wiring: Red for +5V; blue for signal output. 150 psi Input: 0-150 psi. Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5 V, outputs 75 psi; 2.5 V, outputs 150 psi; 4.5 V Accuracy: +/-0.5% FS Thread: 1/8" NPTC Wiring: Red for +5 V; Black for ground; Green for signal output Overload capacity: 2 to 4 times rated pressure Operating temperature: -40 ℃~+120 ℃ Compensation temperature: 0 ℃~+80 ℃ Protection class: IP67 Pressure medium: oil, gas and water compatible with 316L stainless steel Load resistance: ≤ (supply power - 6.5V/0.02A) Ω Long-term stability: less than 0.1% FS/year Temperature effect on zero: typical: 0.02% FS/℃; Maximum: 0.05% FS/℃ Temperature effect on sensitivity: Typical: 0.02% FS/℃; Maximum: 0.05%FS/℃ Shock resistance: 1000g Shock resistance: ≤+/-0.01%FS (X, Y, Z axes, 200Hz/g) Response time: ≤1 ms Insulation resistance: >100 mΩ 500 VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50051-1200 psi Input: 0-200 psi Output: 0.5V ~ 4.5V linear voltage output. Outputs 0 psi 0.5 V, outputs 100 psi 2.5 V and outputs 200 psi 4.5 V NPT Overload capacity: 2 times the rated pressure Medium pressure: oil, gas and water compatible with 316L stainless steel Load resistance: ≤ (supply supply - 6.5 V/0.02 A)Ω Long-term stability: ± 0.2 %FS/year Temperature effect on zero: typical: ±0.02 %FS/℃; Maximum: ±0.05%FS/℃ Effect of temperature on sensitivity: typical: ±0.02%FS/℃; Maximum: ±0.05%FS/℃ Shock resistance: 100g Shock resistance: ≤±0.01%FS (X, Y, Z axes, 200 Hz/g) Response time: ≤ 1 ms Insulation resistance: >100 mΩ 500 VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50081-1; EN50082-2; IEC6 1000-4-3 Wiring connector: quick disconnect waterproof. The corresponding connector and wiring harness (pigtail) are included. Wiring: red for IN+; black for GND; Green for OUT. 300 psi Input: 0-300 psi Output: 0.5-4.5 V Linear voltage output. Outputs 0 psi 0.5 V, outputs 150 psi 2.5 V, outputs 300 psi 4.5 V Accuracy: +/-0.5% FS Thread: 1/8" NPTC Wiring: Red: +5V; Black: ground; Green: signal output Overload capacity: 2 to 4 times rated pressure Operating temperature: -40~+120℃ Compensation temperature: 0℃~+80℃ Protection class: IP67 Pressurized medium: oil, gas and water compatible with 316L stainless steel Resistance Load: ≤ (supply power - 6.5V/0.02A)Ω Long-term stability: less than 0.1% FS/year Temperature effect on zero: typical: 0.02% FS/°C; Maximum: 0.05% FS/°C Temperature effect on sensitivity: Typical: 0.02% FS/°C; Maximum: 0.05% FS/°C Shock resistance: 1000g Anti-shock: ≤+/-0.01%FS (X, Y, Z axes, 200 Hz/g) Response time: ≤ 1ms Insulation resistance: >100mΩ 500VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50051-1,500 psi Input: 0-500 psi (gauge pressure) Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 250 psi outputs 2.5V and 500 psi outputs 4.5V. Accuracy: +/-1%FS Thread: 1/8" NPTC Wiring: red for +5 V; Black for ground; yellow (green) for signal output. Overload capacity: 2 to 4 times the rated pressure. Operating temperature: -40 ℃ ~ +120 ℃. Compensation temperature: 0 ℃ ~ +80 ℃. Protection class: IP67. Medium pressure: oil, gas and water compatible with 316L stainless steel. Load resistance: ≤ (supply - 6.5 V / 0.02 A) Ω. Long-term stability: Less than 0.1 %FS/year. Temperature effect at zero: typical: 0.02 %FS/℃. Maximum: 0.05%FS/°C Effect of temperature on