Hardware system to install a sliding door. Rail with rail and bearings from which a sliding door is hung, which slides along the rail. Ideal for installing sliding doors, where the installation of traditional swing doors is not possible, due to a question of space, or for aesthetic reasons. The kit includes all the necessary parts to install the sliding door (the door is not included).
Kit for installing a sliding door. Model with cobalt-colored MDF wood perimeter.
2m long rail (it is presented divided into two parts that fit together). Bearing system that slide along the rail, smoothly and reliably.
Total size of the entire rail, with hardware and wooden perimeter: 200 x 7.3 x 9 cm. Maximum weight supported (door): 35 Kg.
Guide is supplied to optionally install on the ground. Avoid swinging the suspended door. To install this guide, the door must have a 7 x 20 mm (width x height) linear groove at the bottom.
All parts are supplied, disassembled, together with a very clear and graphic installation manual.
Questions & answers
All you need to know about this product from our experts
No questions have been asked (yet). So you can get started as soon as you are ready!