Professional 100cc Paint Gun with 1 x 1.0mm Nozzle, HVLP Gravity Feed Air Spray Gun for Car Furniture

Features: Gravity Feed: The air sprayer uses a gravity feed system, ensuring efficient paint utilization, saving paint, and preventing waste. Adjustable Nozzle: Adjust the nozzle screw to control the sprayer needle flow and freely adjust the size and flow rate of the paint. Adjustable Spray Range: The size and width of the atomizing spray pattern can be adjusted to achieve a comprehensive spraying effect. Easy to Use: The sprayer is easy to install, convenient to use, and simple to operate. It is suitable for beginners and a helpful tool. High Quality: The air sprayer is made of high-quality aluminum, copper, and stainless steel, making it durable. The spray capacity is 100 ml, with sufficient capacity to meet your needs.

Specification: Item Type: Air Sprayer Material: Aluminum, Copper, Stainless Steel Weight: Approx. 353 g / 12.4 oz Caliber: 1.0 mm / 0.04 in Pot Capacity: 100 ml Recommended Paint Pressure: 3.0 bar Feeding Method: Gravity Type Recommended Spraying Distance: 16-25 cm / 6.2-9.8 in Air Consumption: When the paint air inlet pressure is 2.0 bar, the air consumption is 270 L/min. Maximum Air Inlet Pressure: 10.0 bar

Features: HVLP type and high atomization low-pressure nozzle: High pressure and low pressure, high spraying efficiency, paint saving, environmental protection

How to Use: 1. Before 1. For the first spray, any residue in the coating channel must be cleaned first. The release agent should be added to the sprayer container, and the inside of the sprayer should be filtered as much as possible to ensure cleanliness. 2. Set the appropriate spraying air pressure during spraying. 3. During spraying, control the angle and distance between the sprayer and the spraying parts. After pressing the trigger before pre-spraying, the first speed setting can be used to blow away dust. 5. The paint flowing through the second-speed nozzle passes through the train, and the pre-sprayed air is atomized simultaneously. 6. Depending on the paint flow rate, adjust the screw cap to control the sprayer needle's flow and freely adjust the paint flow rate. 7. Depending on the spray area, adjust the size and width of the atomizing spray area to achieve a comprehensive spraying effect. 8. After use, clean the airflow cap injector (first pour the paint into the sprayer, then add the thinner, then press the trigger while shaking to spray as much of the residual paint inside the sprayer as possible). Then remove the airflow cap for cleaning. If the airflow cap is very dirty, soak the thinner for a while before cleaning it. Be careful not to damage the airflow cap hole. After removing the airflow cap, protect the nozzle from damage. If the cleaning is not thorough, the nozzle will be damaged and the airflow cap hole will be affected by the atomization effect. Package List: 1 x Air Spray Gun, 1 x Spray Can, 1 x Brush, 1 x Pagoda Connector, 1 x Accessory, 1 x Nut, 1 x Manual