Professional Gravity Feed Paint Spray Gun with 2 Nozzles (1.7mm & 2.0mm) and 600cc Gravity Feed Cup for HVLP Furniture

Professional Gravity Feed Paint Sprayer with 3 Nozzles: 1.4mm, 1.7mm, 2.0mm, 600cc Cup, HVLP Gravity Feed, for Car and Furniture, Small Repair SprayerLightweight, simple, and easy-to-grip paint sprayer.The stainless steel needle and nozzle allow for the application of a wide variety of coatings.This is a gravity-fed HVLP composite sprayer designed to spray all light to medium viscosity materials.It can apply enamels, lacquers, polyurethane and urethane finishes (including base/clear coat), and all primers.By adjusting the flow control knob to adjust the coating speed and flow rate to suit the project size, precise paint jobs can be achieved.Before the first spray, clean the cavity.Add thinner to the spray gun container and try to filter the inside of the gun to ensure it is clean.After each use, clean the air cap and nozzle promptly (first pour the paint into the cavity, then add thinner and shake the gun while pressing the trigger to try to expel any paint inside). If the air cap is very dirty, let it soak in the thinner for a while before cleaning it.Be careful not to damage the holes in the air cap when cleaning, and remember to protect the nozzle, otherwise the atomization effect will be affected.If the spray pattern decreases or becomes "jerky" after prolonged use, the problem may be: First, there is not enough paint in the container to evenly cover the bottom inlet.It is recommended to perform a test after filling the paint tank.If the paint tank leaks, remove it, clean it, and reinstall it.The problem may be resolved.+ product1.4 mm/1.7 mm/2.5 mm nozzlesThe needle nozzle assemblies are made of copper, which is more resistant to abrasion and corrosion than stainless steel nozzles, for long-term use and lower replacement costs. Set of 1.4 mm/1.7 mm/2.5 mm stainless steel precision needles and nozzles.Needle tip detailSpecially treated for a good seal and long service life.600cc Colored CupsThe 600ml PVC plastic colored cup is more durable and drop-resistant than ordinary cups, with high spraying efficiency and easier cleaning.The scale is clear, allowing for better control of the application rate.FeaturesMaterial: Stainless steelStyle: Spray gunBy adjusting the flow control knob to adjust the coating speed and the application rate according to the project size, precise painting results can be achieved.