Programmable Digital 12V 20A DC Relay Timer, Time Cycle Delay Switching Module

DC 12V 20A Programmable Digital Relay Time Delay Switching Module

Brief Description:

Please pay attention during your first use. You must wait 6 seconds after setting the data; the module will save the date you set after 6 seconds.

Shortly press the "SET" button: start the time setting mode; the screen will flash. Set time T1 while it is flashing. Press the "SET" button, and the screen will flash again. Set time T2 while it is flashing. Then use one of two methods to save the time: 1. Wait 6 seconds; the screen will stop flashing. The system will automatically save the set time. 2. Press the "SET" button.

Long press the "SET" button: start the parameter setting mode. There are two parameters to choose from: P0 and P1.

You can select P0 or P1 by briefly pressing "SET". The settings can be adjusted using the up and down arrows below the P0 and P1 settings. Restart button: Restarts the function. Once the timer has finished, it works normally. To operate it again, briefly press the "Restart" button to restart the timer.