PU Polyurethane Air Hose, 10M Blue PU Polyurethane Air Hose 6mm OD x 4mm ID with Fittings

When the end of the PU tube is used and loosened, it immediately returns to its original shape, with high elasticity and excellent flexibility. The surface of the air tube is smooth and flat, lightweight, more flexible than nylon tube, convenient for pipe laying. As the temperature increases, the operating pressure must be reduced accordingly. Exceeding these limits may result in tube rupture.Material: polyurethane Working pressure: 0 - 1 MPA Working temperature: -20 ~ 80°C Product features: very flexible, resilient, not easy to deform when bending, wear-resistant.Scope of application: air transportation piping, pneumatic tools, air compressors, automobiles, factory machinery and other mobile tool accessories. When cutting, make sure that the surface of the shears is smooth and flat. If it is not level, leaks will occur. When connecting, insert the pipe into the bottom of the connector. The connector is completely waterproof and does not leak easily. High flexibility and durability, more consistent design and wide application range for long-term use. Raw material tape will need to be wrapped around the connector to improve the seal and avoid leaking problems.Connections are made as follows: 1:1) Check that the fitting seal is intact and cut the end of the air hose flat to ensure a clean cut.2) Insert the connector and push it firmly until it is fully seated to ensure a tight connection. (The blue lever on the connector can be rotated 360 degrees freely, if you need to change the direction, you can do it directly through the connector. The release ring is also designed conveniently).3) Perform an air pressure test to check for leaks and tightness of the connection.4. cut off the air supply, make sure there is no pressure, press the tip on one side and pull out the tube on the other side to avoid damage to the connector or tube. The connection is convenient and quick, saving time and efficiency.Features: Parameters of polyurethane pneumatic tubes: Note: