Pump of transfert of fuel Electrique kit of pump d' extraction d' oil automatic for car pump diesel 12V 60W -YES

Pump of transfert of fuel

Pump of transfert of fuel Electrique kit of pump d’extraction d’huile automatic for car pump diesel 12V 60W

This pump of transfert d’extracteur d’huile uses a mini pump self-priming 12v for echanger l’huile engine of car. It works in connectant the pliers to the battery of car 12 V and is widely used in the equipment industrial general, because this pump can non only pomper of l’huile, but also pomper of l’huile hydraulic and d’autres liquids. C’est a equipment for for of changements d’huile fast and clean.

+ product

Widely used in the equipment industrial general.

This works in connectant the pliers to the battery of car 12V.

A equipment for for of vidanges fast and clean.

Switch operation/stop simple, easy to use.

Application: widely used in the equipment industrial general, the equipment medical, the equipment chemical, the construction navale, the drinks, the cleaning of mat and of floor, the equipment of purification and of processing of l’eau, the cleaning of vehicles, the spraying agricultural, the pressure of pipelines zo, the cooling of l'epuration of l’air, the industries of charcoal and of the metallurgy

How use:

1. Commencez to make turn the engine of the car during a certain time, when the of of l’huile atteint approximately 50 degrees, commencez to pomper of l’huile.

2. Connectez the pump to l’alimentation, faites-la operate during a moment and observez if input and the output are normales.

3. Open the cap of filling, sortez the gauge, forcez the tube in the bottom of seal, up to this that the tube not bouge not ; then place the hose d’admission of the gauge d’huile in l'extremite (the tube in the bottom of tank, l’endroit concave lower, in order of pomper completely l’huile); in l’absence d’huile or in pompant very lentement or by intermittence, this is generally caused by of hoses and of fittings desserres. You devez reinstaller the hoses and the fittings.)

4. After the pompage of l’huile, remove the tube, then faites operate the pump during a certain time, clean l’huile restante to inside of pompage or pompez of l’eau during a certain time up to this that the head of the pump either clean.

5. If you not l’avez not used during a long time, it itself can qu’il n’y ait not d’aspiration, then versez simply l’eau in the pump and faites operate the pump during few minutes up to this that all l’air either evacue.

Features

Voltage nominale : DC 12V

Power nominale : 60 W

Pressure maximum : Max. 0.8MPA

Flow maximum : 5L/min

Diameter of the pump : approx. 4,8 cm/1,89″

Length : approx. 14,5 cm / 5,7 «

Size of hose of output (dia. * L): approx. 11mm*140cm/0.43″ * 55″

Diameter of hose d’admission : approx. 8 mm and 6 mm / 0,31″ and 0,24″

Length of hose d’admission : approx. 100cm / 39.37″

Length of power : approx. 30 cm / 11,8″

Length of clips : approx. 8 cm/3,15″

Color main: Black

Package included :

1 x pump to oil

1 hose of output of 11 mm

1 hose d’admission of 8 mm

1 hose d’admission of 6 mm

2 clips

Note:

1. Please allow a error of 1 to 3 mm due to the measurement manual. You for your understanding.

2. If you want connect this pump to l’alimentation mains, you aurez need of a converter of power.

3. please use when the engine is hot, l’huile engine is hot and the viscosity is more low, this will be more easy and more fast to pomper.

4. This product is not not autorise to pomper of liquids corrosifs, of acides forts and of liquids alcalins forts.