Vand Olieborepumpe, Elektrisk Borebit Brændselsolie dieselpumpe, selvpring olieborefitings fittings-

The material - the electric borehole water pump is made of ABS and aluminum. Have high hardness and good seal. Wipe with lubricating oil before each use and rinse with clean water after use. When pumping abrasives and liquids containing solids, it is necessary to add a filter to the inlet line to achieve longer life.

The operating temperature of the fuel pump [high performance] is 5 to 49 degrees. The oil pump flow at 1500 rpm is 15 L. And the oil pump flow at 3000 rpm is 30 L. Minute. Note: The recommended speed is between 1500 and 3500. Before use, make sure that the tube of the oil pump plug inlet is sealed and that the length of the hose should not exceed 2.75 meters (9 feet). ).

[How to be used] - Our product is powered by electric drill. After starting, check whether a specific liquid in the water inlet pipe is sucked into the pump within 15 years after 20 seconds. If not, check if the oil inlet pipe is correctly installed on the oil inlet pump. Note: Do not let the pump dry out

If the pump does not start, check if the hose is broken or blocked. Do not use the pump on the back

The laptop pump case is small in size, compact in appearance, light in weight and easy to carry. You can easily carry it to your desired workplace, then set it up and start using it, saving your working time. It is better to install a sealing ring at the interface to ensure leakage during use. Check whether it is installed correctly before use and whether the air in the oil pump is emptied.

The widely applicable oil pump can also be used as a water pump. It is also suitable for swimming pools, aquariums, fountains, and can also be widely used for household cleaning.