Push Button Switch, AC 220V/380V 10A Waterproof Power Control Push Button Switch On/Off Button Machine Tool Switch

【Switch Details】The ON pushbuttons are self-locking, the OFF pushbuttons are automatically reset. The control switch is in open operating mode, the model is 0-10kΩ, the distance between the mounting holes is approximately 7.7cm.

【Wiring Details】Suitable for AC 50Hz (60Hz) electrical circuits, voltage up to 380V, 220V. Single-phase 220V and three-phase 380V wiring can be used. The wiring includes the hot wire and the neutral wire. The power used by the equipment is less than 1500W. If it is higher than that of the AC contactor, please use an AC contactor.

【Easy to Use】This switch is designed without NC (normally closed) contact, allowing you to control your motor directly. The internal screw terminals ensure easy wiring. Pressing the green button on the control switch illuminates the lockout button; pressing the red button illuminates the green button and turns the switch off. This switch is a commonly used equipment switch in many fields and also has an isolation function.

【Wide Application】This is a waterproof control switch, a hold-open switch, a drill switch, and a machine push button. Widely used in mechanical equipment, textile machinery, distribution boxes, ships, operating rooms, etc. These versatile control switches are applicable to industrial equipment, production equipment, complete control cabinets, factory workshops, etc.

【Excellent Performance】Easy to operate, the direct switch does not require a contactor. The control switch has a flame-retardant PC material housing and is a waterproof push button with a protective plastic cover. It is water and oil resistant for longer use.