PWM Solar Charge Controller Panel, Intelligent Regulator, Adjustable LCD Screen, 2 USB Ports, 12V/24V, White, 30A

1. ADJUSTABLE PARAMETERS: The solar controller adopts an industrial main control chip and a large LCD screen. Charge and discharge parameters can be adjusted. 2. HIGH EFFICIENCY AND INTELLIGENT: Complete three-phase PWM and MPPT charge management for efficient and fast intelligent charging, effectively extending battery life. 3. MULTIPLE PROTECTION: Built-in overcurrent and short-circuit protection, open-circuit protection, and reverse connection protection are all self-recovering and will not damage the controller. 4. HUMANIZED DESIGN: Adopts dual MOS to prevent backflow, resulting in ultra-low heat generation, safety, and stability. 5. WIDE APPLICATION: The PWM solar charge controller is easy to install and use. The intuitive LCD screen clearly displays the status and data, making it suitable for home, industrial, commercial, and other applications.

Specification:

Item Type: PWM Solar Charge Controller. System Voltage: 12V/24V Adaptive. Maximum Photovoltaic Voltage: <50V. Float Charge Voltage: 13.7V (default, adjustable). Discharge Cutoff Voltage: 10.7V (default, adjustable). Discharge Recovery Voltage: 12.6V (default, adjustable). USB Output: 5V 3A. Standby Current: Operating Temperature: -35~+60°C. Color: White.

Package List:

1 x PWM Solar Charge Controller

1 x User Manual

Note:

1. The controller is 12V/24V automatic. When installing the controller for the first time, please ensure the battery has sufficient voltage for the controller to identify the correct battery type. 2. Install the controller as close as possible to the battery to avoid voltage drop caused by excessively long wires, which can affect normal voltage readings. 3. This controller is only suitable for all types of lead-acid batteries, lithium batteries, and 12V rechargeable batteries (including open, sealed, and collodion-sealed batteries). 4. Battery type description: B1 is a lead-acid battery (automatically identifies 12V and 24V); B2 is a lithium-ion battery (11.1V series 3 lithium battery); B3 is a lithium iron phosphate battery (4 series 12.8V). The factory default setting is B1. 5. This controller can only use the photovoltaic panel as a charging source. Do not use DC or other power sources as a charging source. 6. The controller will get hot during operation; please ensure it is installed on a smooth, well-ventilated surface.