PWM Speed Regulator Button Type Motor Current Regulation Type Power Controller DC660V

1、This regulator is integrated designed for more convenient using experience.

2、The motor can be set to slow start/slow stop time, and the start and stop of the motor is smoother.

3、Can set the upper and lower limits of the rotation speed.

4、Can set the motor acceleration and deceleration amplitude.

5、Wide power supply voltage range and stepless speed adjustment.

Features:

This regulator is integrated designed for more convenient using experience.

The motor can be set to slow start/slow stop time, and the start and stop of the motor is smoother.

Can set the upper and lower limits of the rotation speed.

Can set the motor acceleration and deceleration amplitude.

Wide power supply voltage range and stepless speed adjustment.

Specification:

Input Voltage:DC6~60V

Output Voltage:Linearity under load

Output Current:0~30A

Continuous Current:Within 20A

Speed Regulation Type:Current Regulation

Speed Regulation Mode:Inching + -

Speed Regulation Range:0~100%

Control Frequency:21KHz

Connection Type:Barrier terminal block

Supported Motor:Brush Motor

Size:96 x 61 x 34mm / 3.78 x 2.4 x 1.34in

Panel Opening:92 x 56mm / 3.62 x 2.2in

Rotation Speed Digital Display:0~100%

Package List:

1 x Speed Regulator

Function:

Slow start time setting

Function 1: 000 - 100 Slow start to 100% speed time is adjustable between 0-10 seconds, the default is 1 second.

Slow stop time setting

Function 2: 000 - 100 The slow stop time is adjustable between 0-10 seconds. The default is 1 second.

Lower speed limit setting

Function 3: 000 - 080 The minimum speed is adjustable between 0-80% and less than the maximum speed setting. The default is 0.

Speed upper limit setting

Function 4: 000 - 100 The maximum speed is adjustable between 0-100% and is greater than the minimum speed setting. The default is 100%.

Acceleration and deceleration value setting

Function 5: 001 002 005 010 015 020 020 025 Each press of the addition and subtraction key speed changes by 1%, 2%, 5%, 10%, 15%, 20%, 25%.

Note:

The input voltage must be positive or negative. It is not possible to input 220V.

The input voltage should be equal to the rated voltage of the motor within 6-60V.