Quick-release toilet seat hinge with rubber screws, compatible with top hinges

【Size】 Please check the size before placing your order. Expansion rubber length: 4cm/1.57". Fits mounting holes with a diameter of 14-18mm. Pin diameter approximately: 8mm, length: 28mm. 【Material Quality】 Made of rubber and 304 stainless steel, the rubber plug is more resistant to dirt and abrasion, expands better, and is less likely to break. More flexible and durable than other plastic plugs. The metal screw under the rubber protection has good rust prevention and can be used for a long time. 【Design Delicacy】 The rubber plugs have a threaded section at the bottom so you can push them directly into the hole at the top of the toilet bowl. No need to install the bolt on the other end of the screw. Convenient and time-saving. 【Widely Used】 Specifically designed to hold toilet seat lids in place, fits most standard toilet seats with top hinges fixed.【Package Includes】 1 pair of toilet lid hinge fittings, including expansion rubber bolts and nuts, and washers. Supplied with all necessary accessories and can be easily assembled in minutes. Installation Steps: Step 1 Insert the rubber nut into the hole in the toilet lid. Step 2 Insert the metal prongs into the rubber nut, adjust the position of the metal prongs, and tighten them slightly. Step 3 Once adjusted to the correct position, tighten the screws until they are snug (fixing effect: tightening will allow the bottom rubber plug to expand). Step 4 Put on the decorative cap, and the installation is complete.