Radio receiver, full-band software 0.1MHz-1.7GHz HF FM radio receiver, ADSB aviation band

Features:

The signal received by the antenna is converted into data via the receiver, sent to the computer, Android mobile phone, and other devices via the USB interface, then processed by the software on the computer, Android mobile phone, and other devices to demodulate the signal, display the spectrum, and adjust the reception arbitrarily. Bandwidth, signal recording, saving, playback, and other functions are also available. Thanks to the SDR software, reception of electromagnetic waves in the range of 100 kHz to 1.7 GHz supports AM, FM (NFM, WFM), CW, DSB, LSB, and USB demodulation.

It can be used to listen to shortwave single-sideband communication, FM radio, walkie-talkie calls, the aviation band, ADS-B meteor monitoring radar decoding, AIS signal reception, etc. Analog and digital subtones can be cracked via software. Automatic search scans can be configured. The IDs of common digital walkie-talkies can be hacked, and the voice signal can be demodulated by software. Technical Specifications: This receiver features a built-in 1 ppm temperature compensation crystal [TCXO], making the frequency more stable and accurate. Near-zero temperature drift [initial deviation of 2 ppm, temperature drift of 1 ppm] increases the internal chip's heat dissipation, resulting in more stable operation. Utilizing the latest RTL2832U + R820T2 solution [the R820T2 tuner has slightly better sensitivity than the R820T, a lower noise floor, and a higher signal-to-noise ratio. It can operate more stably at frequencies around 1.5 GHz.] The Q channel on the RTL2832U is used to enhance direct acquisition and reception of the 100 kHz–24 MHz frequency range. This achieves a full 100 kHz–1.7 GHz reception range. Supports XP, Win7, Win8, Win10, Mac, Android, and other systems. Weight: 36 grams