Rainwater downpipe and garden drainage ditch separation system, drain pipe collector for rainwater harvesting.

Instructions for Use:

1. Measure a 12 cm (4.7 inch) section from your existing downpipe. This section must be at least 46 cm (18 inches) above the top of the selected rainwater harvesting container before cutting it.

2. Assemble the two parts of the rainwater harvesting container as shown in the diagram (usually no screws are required).

3. Install the silicone plug and stainless steel clamp, insert the pipe, and tighten the clamp.

4. For winter storage or when the container is full, tighten the lid to stop the water flow.

Home Use: Ideal for DIY projects, saving water and money.

Rainwater Harvester Design: Modern and practical design for precise control of rainwater in your garden.

Rainwater Harvesting Applications: Effectively collects and reuses rainwater, reducing drinking water consumption.

Rainwater Harvester | Material: Made of high-quality, durable plastic.

Car washing and other uses: Suitable for washing cars, gardens, and bathrooms, improving water efficiency.