Rainwater downpipe and garden gutter diversion system, drainage pipe collector for rainwater harvesting

Instructions for use:

1. Measure a 12 cm (4.7 in) section from your existing downspout. This section must be at least 46 cm (18 in) above the top of the chosen rainwater harvesting container, then cut it.

2. Fit the two parts of the rainwater harvesting container together as shown in the diagram (installation is usually screwless).

3. Install the silicone stopper and the stainless steel clamp, insert the pipe, and tighten the clamp.

4. For winter storage or when the container is full, close the cap to stop the flow of water.

Home Use: Ideal for DIY projects, saving water and money.

Rainwater Collector Design: A modern and practical design for precise control of rainwater in the garden.

Applications for Rainwater Harvesting: Effectively collects and reuses rainwater, thus reducing drinking water consumption.

Rainwater Collector | Material: Made of high-quality, durable plastic.

Car Washing and Other Uses: Suitable for washing cars, gardens, and bathrooms, improving water usage efficiency.