Rapanda – 100cm Silicone Shower Gate – Self-adhesive Anti-Overflow – Water and Mold Resistant – Easy Installation

General Description: The 100cm silicone shower barrier is designed to prevent water from overflowing and to keep your floors and countertops clean and dry. At only 18mm high, it is discreet and poses no tripping hazard. Made from high-quality elastic silicone, it is water-resistant, mold-resistant, and easy to clean, making it suitable for all seasons. Technical Specifications: Length: 100cm; Height: 18mm; Material: Environmentally friendly elastic silicone. Installation: To install the shower barrier, ensure the surface is clean and dry. Follow these steps: Cut to the required length with a knife. Remove the adhesive backing and stick it to the surface. Press firmly to ensure a good bond. For corners, cut at 45 degrees and assemble at 96 degrees for added stability. Uses: This barrier can be installed in various locations to prevent water from flowing out, including: On the shower or bathtub floor. Around sinks and countertops. In bathroom corners and around washbasins. On window sills and balconies. Other information: It is recommended to apply silicone sealant to the edges for added durability (not included). After installation, leave the barrier in place for 30 hours without contact with water to allow the sealant to cure.