Regulator of temperature of the congelateur, Thermostat, panel of control, Protection IP65, 220V, 10HAS

Features:

1. LARGE RANGE OF TEMPERATURE : The controller of temperature of the congelateur has a range of control of temperature of -40 ℃ to 50 ℃ and a range of measurement of temperature of -50 ℃ to 99 ℃

2. wide application : the thermostat 220 V can be used in equipment of high power, such as the incubators, the eleveurs, the refrigerators, the fermenteurs, the tighten, etc.

3. high precision : The regulator of temperature of the congelateur has a precision of 1 ℉ for maintain the temperature in the range desired, precise and reliable

4. PRECISE AND EFFECTIVE : The double probe of temperature brings a precise measurement, designed for be used in the congelateurs of kitchen, the refrigerators, the cabinets of cooking, etc.

5. DESIGN D'energy saving : With a consumption energy lower to 3 W, this controller of temperature you helps to save on the costs energy-efficient while now the temperature ideal for your biens stored.

Specifications:

Item Type : Controller of temperature of the congelateur

Material : ABS

Voltage : 220 V

Current of output : 10 HAS

Consumption electric : Type of sensor : NTC, 25 ℃, resistance 10 KΩ

Class of protection of the panel front : IP65

Environment of storage operationnel : -15 ℃ ~ 65 ℃, 20 % ~ 85 % (without gel)

How to Use: 1. Adjustment of the temperature : in condition of control of measurement, press on the button « » or « 、 » for adjust the adjustment of the temperature (temperature stop). If no button is not actionne during 5 seconds, the temperature stop adjusted will record and reviendra to condition of control of measurement. Description of the output of control of temperature : Cooling : when the temperature of cabinet is upper to the value of temperature defined (corresponding to SET), more l'hysteresis of control (E3), and after clock minimum of start of the compressor, the cooling starts. When the temperature of cabinet is lower to the value of temperature defined (corresponding to SET), the cooling will disable. Reset settings of output : press on "+T" during more than 5 seconds and screen represente YES for restore the settings factory. 2. Switch power supply : to condition of setting under voltage, press press on the button « coeur » during 5 seconds for pass to condition of setting outside voltage, and the interface represente OFF. In condition of setting outside voltage, press press on the button « coeur » during 5 seconds for enter in condition of setting under voltage, and the interface represente condition of control measurements.

Package List:

Package includes 1 x controller of temperature of the congelateur

Note:

Danger 1 : Do a distinction strictly between the cables of sensor, the line electric and the interfaces of relay of output for prevent the bad connections. The Supply Voltage must not exceed the range of Rated Voltage of 220 V ± 10 %.

Danger 2 : the connections of wiring must be perform outside voltage.Warning 1 : it is interdit use this device in environments with spraying water, moisture excessive (moisture relative > 90 %, condensation can itself produce),

Warning 2 : Interdit to be used to high temperature, with of strongly interference electromagnetic and in environments translucent solvants.

Attention 1 : The Supply Voltage must be coherent with the voltage indicated on the machine and ensure the stability of the Supply Voltage.

Attention 2 : For prevent the interference potentielles, it is recommended of keep a distance appropriate between the wires of the sensor and the line electric.

Attention 3 : When of installation of the sensor of l'evaporator, the sensor must be placed to proximity of the hose copper to 5 cm of input of l'evaporator, ensuring a good contact between the sensor and the hose copper.