Relay Module, Delay Relay Module, 5V 12V 24V Delay Cycle Timer Module, 0.01s to 9999min with LCD screen

Specifications: Item Type: Delay Relay Module Working Voltage: 6-30V Timing Range: 0.01s-9,999min continuously adjustable Trigger Signal Source: High-level trigger (3.0V~24V), low-level trigger (0.0V~0.2V), switching quantity control (passive switch) Output Capacity: Can control devices at 30V 5A or 220V 5A Quiescent Current: 15mA Operating Current: 50mA Lifespan: >100,000 cycles Operating Temperature: -40~85°C Size: 88x3.8x1.9cm/3.15x1.5x0.75in How to Select the Time Range: In the OP/CL parameter editing interface, briefly press the STOP button to select the timing range: XXXX: The time range is from 1s to 9999s XXX.X: Time range is 0.1 s 999.9 s XX.XX: Time range is 0.01 s to 99.99 s XXXX: Time range is 1 min to 9999 min Parameter setting: Parameter description: OP: conduction time, CL: disconnection time, LOP: cycle number (1-9999 times, "----" means infinite loop) a) Enter the setting interface by pressing and holding the SET button; b) First, set the working mode. The working mode indicator flashes. To change the working mode, briefly press the UP/DOWN button; c) Briefly press the SET button to select the working mode and enter the system parameter settings; d) In the system settings interface, briefly press the SET button to change the system settings to be modified, briefly press/long press the UP/DOWN button to modify; (Note: Briefly press SET in P-1 ~ P-3, P-7 mode);

["1. With the LCD display, the current mode and settings are clear at a glance. Add sleep mode; after activation, if no operation is performed within 5 minutes, the LCD backlight will automatically turn off, and all buttons will wake the screen.","2. Supports high/low level trigger control and switching quantity control, suitable for most applications.","3. Wide power supply voltage of 6~30V, supports 5.0V micro USB power supply, very convenient to use. Automatically saves all parameter settings in case of power failure.","4. Supports UART data download and parameter setting. Different parameters 0P, CL, LOP can be set; these parameters are independent of each other and saved separately.","5. One-button emergency stop function (STOP button) with connection protection Inverted. Industrial-grade printed circuit board with optocoupler isolation to improve anti-interference capability.