Remote Battery Disconnect Switch 12V 250A Battery Disconnect Switch

1. More Convenient: The wireless remote control allows you not to open the hood every time to turn off the power, just press the button on the remote control, then your car's power system is disconnected. 2. Battery Protection: Battery cut-off switch plays an important role in extending battery life, it effectively prevents the battery from discharging when not in use. 3. Space saving: Our battery switch does not have many complicated wires, eliminating annoying cable tangles, and its size is rather small, so it will not occupy much space. 4. Low Power Consumption: The power consumption of this switch is 5mA in standby and about 3W in operation, so this product is energy efficient. 5.Convenient to Use: The battery disconnect kit comes with two copper plates, two metal clamps and two copper nuts, that means you can install it on the positive or negative side easily. Specification: Item Type: Remote Battery Disconnect Switch. Material: ABS + Copper + Silver Battery Model: CR2016 (one battery for each remote switch, comes with built-in battery) Battery Capacity: 75mAh Working Voltage: DC11-15V Rated Current: 250A Starting Current: 450A (less than ten seconds) Standby Current: 0.005A Switch Size: Approx. 45 x 45 x 45mm / 1.77 x 1.77 x 1.77mm Instructions: Working voltage: 12V and 24V remote control power off switches cannot be mixed.12V is selected for a battery vehicle, and the corresponding voltage switch should be selected for most cars, small trucks, agricultural vehicles, etc. Switching Power Consumption: The consumption of this switch is 5m in standby and about 3W in operation Package list: 2 remote controls 1 x main power switch 1 x cable lug 2 x battery clip 1 x copper connectors Note: 1: Install a relay switch and turn it on, which will increase the power consumption of the battery.When leaving the vehicle, use the remote control to turn off the main power in time, to avoid power loss caused by too long power consumption and failure to start.2: Since cutting off the power supply of the entire vehicle will cause the alarm and on-board computer to fail due to power failure, the vehicle can only be used after a power failure. 3: When driving, do not disconnect the relay switch to avoid the generator voltage increasing and damaging the automobile electrical appliances.