Remote Battery Disconnect Switch, Car Battery Disconnect Switch, Power Off Switch with Remote Controlled Copper Terminal (12V200A)

General Description

Discover our new remote battery disconnect switch, a high-quality electromagnetic device that allows you to control your battery from inside your vehicle. This remote stop switch operates on a 12V voltage and is compatible with a wide range of vehicles, including cars, minivans, and agricultural vehicles.

Technical Specifications

Operating Voltage: DC 11-15V

Rated Current: 120A-200A

Starting Current: 200A-360A (less than ten seconds)

Standby Current: 0.005A

Materials: ABS, Copper, Silver

Battery Model: CR2016 x 1

Battery Capacity: 75 mAh

Switch Size: Approx. 45 x 45 x 45 mm (1.77 x 1.77 x 1.77 inches)

Compatibility and Accessories

Compatible with most cars, minivans and agricultural vehicles

Includes: 2 remote controls, 1 main power switch, 1 copper terminal, 2 battery clips, 1 copper adapter

Installation

Installing this switch is quick and easy. Here are the steps to follow:

Connect the red wire to the positive terminal of the battery and the black wire to the negative terminal.

The two large terminals of the relay switch constitute the main switch, with one input line and one output line.

For start control, connect one large terminal to the negative terminal of the battery.

Usage

To use the switch, activate it with the remote control to turn the battery on or off. Note that this switch cannot start the engine; it only serves to disconnect the battery power.

Other Information

After installation, when the switch is activated, battery power consumption will increase. It is important to disconnect the main power supply with the remote control before leaving your vehicle to prevent excessive battery discharge.