Remote Battery Isolator Switch, DC 12V Car Isolator Switch Anti-Theft Main Circuit Breaker with Remote Control Copper Terminal for Car (12V 120A)

Low Power Consumption: The switch consumes 5mA in standby mode and about 3W in working mode, which is more energy efficient than new cars.

Stable Performance: The external antenna makes the signal farther and farther stronger. Only when turning on/off the battery, the engine cannot be started. Standard design.

Convenient and Simple: This remote control electromagnetic battery switch allows you to move the trigger under the hood toward your hand.

Working Voltage: Stop Switch 12V remote control, working voltage range 11-15V, suitable for most cars, small trucks, agricultural vehicles, etc.

Long Control Range: Remote Control Car Battery Disconnect System Distance, Turn off your car's power system with the remote control, 150ft control distance.

Specification:

Item Type: Battery Remote Switch

Material: ABS, Copper, Silver

Battery Model: CR2016 x 1 (built-in)

Battery Capacity: 75mAh

Working Voltage: DC11-15V

Starting Current: 200A-360A (less than ten seconds)

Standby Current: 0.005A

Switch Size: Approx. 45 x 45 x 45mm/1.77 x 1.77 x 1.77inch

Usage:

Installation Method: 1: The red wire is connected to the positive terminal of the battery. The black wire is connected to the negative terminal of the battery. This is the power supply for the switch and the remote control switch consumes very little power. 2: The two large terminals of the relay switch form the main switch. An incoming line and an outgoing line play the role of on-off, in no particular order.3: When controlling the on-off switch of the negative pole, a large terminal is connected to the negative pole of the battery, and a large terminal is connected to the negative pole of the battery (the positive pole is also the same).

Packing List:

2 x Remote Control

1 x Power Switch Main Power Supply

1 x Copper Terminal

2 x Battery Terminal

1 x Copper Adapter