Remote control for shutter, compatible with Somfy Keytis 2, 4 RTS, Keygo, Telis 433 MHz

General descriptionThis remote control is compatible with various Somfy RTS products, allowing you to operate your shutters seamlessly. Please note that this is a compatible remote control, not an original product.Technical specificationsFrequency: 433 MHzChannels: 4Battery: 12 V / 27 A alkalineCompatibility and accessoriesCompatible with RTS models:Keytis NS 2 RTSKeytis NS 4 RTSKeytis 2 RTSKeytis 4 RTSKeygo 4 RTSTelis 1 RTSTelis 4 RTSTelis Soliris 1 RTSTelis 4 Soliris RTSTelis 1 Modulis RTSTelis 4 Modulis RTSCompatible with similar receivers and gate openers: AX24ns, AC230ns, Axovia, Elixo, Ixengo, Axorn, AxRoll, Passeo, Dexxo, FreRoll, Oximo RTS, Orea RTS, Altus RTS, LT CSI RTSContents: 1 remote controlInstallationOpen the receiver box located near your motor.On the receiver board, press the Prog 1 programming button until the LED L1 lights up on the receiver.Press a button on your new remote control, then release it. The LED light on the receiver will flash and then turn off.Wait 10 seconds for your new remote control to be programmed.For white Telis programming with a hidden button: Press the hidden button for 2-3 seconds on the original remote control, then press buttons 1 and 2 on the new remote control for about 1-2 seconds at the same time, followed by pressing button 4 for 1-2 seconds. Your remote control is now ready to work.