Remote control for shutters, compatible with Somfy Keytis 2, 4 RTS, Keygo, Telis 433 MHz
You may also like
Compare with similar items
Product information
Description
Please note that this is a compatible remote control, not an original product.
Frequency: 433 MHz.
Channels: 4.
Battery: 12V/27A alkaline.
Compatible list (RTS only):
Keytis NS 2 RTS / Keytis NS 4 RTS.
Keytis 2 RTS / Keytis 4 RTS.
Keygo 4RTS.
Telis 1 RTS / Telis 4 RTS.
Telis Soliris 1 RTS / Telis 4 Soliris RTS.
Telis 1 Modulis RTS / Telis 4 Modulis RTS.
Compatible with receivers and similar gate openers: AX24ns, AC230ns, Axovia, Elixo, Ixengo, Axorn, AxRoll, Passeo, Dexxo, FreRoll, Oximo RTS, Orea RTS, Altus RTS, LT CSI RTS.
Black Keytis Programming.
1. Open the receiver housing. It is located near your motor.
2. On the receiver board, press the Prog 1 programming button until the L1 LED on the receiver lights up.
3. Press a button on your new remote. Then release. The LED on the receiver will flash and then turn off.
4. Wait 10 seconds. Your new remote is programmed.
White Telis Programming with Hidden Button.
1. Press the hidden button on the original remote for 2 to 3 seconds.
2. Press buttons 1 and 2 on the new remote simultaneously for approximately 1 to 2 seconds, then press button 4 for 1 to 2 seconds. Your remote is now ready to use.
Contents: 1 remote control.
Features
- BrandOTHERS
- Length15 cm
- Width15 cm
- Height35 cm
- Power25 W
'/%3E%3C/svg%3E){kind=small}