Removable 12-way fuse block with 2 fuses and 12 LED indicators, automotive fuse protector for cars, boats and motorhomes

[Product Size]: 150x85x50mm [Product Material]: PBT body, waterproof PC dust cover, nickel-plated copper connection terminals, PPX40 stickers [Input Rated Voltage]: 32V [Input Rated Current]: 100A [Maximum Output Current]: 30A per circuit [Indicator Color]: Red [Main Wire Terminations]: M5 threaded studs [Main Wires]: #4-6 [Single Wire Terminal]: M4 threaded studs [Single Wire]: #12-16 [Indicator Light]: When the red indicator light is on, it means the fuse has blown and it is necessary to replace the fuse in time to continue operation. Product Scope: Can be installed in small cars, villas, caravans, buses, yachts, boats, and other uses listed above. Product Scope: Can be directly connected to any electrical device on the circuit in a car/boat [such as: dome light, car headlights, daytime running lights, fog lights, warning lights, car refrigerator, car charger, car fan, car TV, etc.]. Product Accessories: 2 x Stickers; 4 x Self-Tapping Screws; 6 x 20A Fuses; 6 x 15A Fuses; 6 x 10A Fuses; 6 x 5A Fuses. Fuse Function: In the event of a circuit malfunction or anomaly, the current increases and may damage important or valuable devices in the circuit, burn out the circuit, or even cause a fire. Fuses protect electronic equipment from overcurrents and serious injury caused by internal malfunctions. This is why each fuse has a rated value and blows if the current exceeds that value. If the fuse is correctly placed in the circuit, it will blow automatically when the current reaches a certain height and temperature, thus protecting the circuit. Product Advantages: [1] The products are made of environmentally friendly, flame-retardant PBT material, resistant to high and low temperatures, and fully meet the requirements of [the fuse holder must have good mechanical strength, good insulation, good heat resistance, and be flame-retardant, and must not be used in a way that causes fracture, deformation, combustion, or short circuits]. [2] All busbars and fuse holders are made of nickel-plated copper, with corrosion resistance and excellent electrical conductivity. [3] All fasteners are made of stainless steel. The fuse box inlet and outlet are secured with clamping screws for faster installation, while the fuse box itself is secured with self-tapping screws for easier and safer installation. [4] The product features a red LED indicator for each fuse connected to the electrical devices. When a fuse blows, the red light illuminates, allowing you to immediately identify the blown fuse for quick and convenient troubleshooting! [The stickers can be labeled with the fuse name and affixed to the connected devices. When a fuse blows, the red light illuminates, helping you distinguish between devices not affected by the problem and saving time and effort.] 6. This product comes with a double fuse. If the fuse blows during use, you can immediately replace it with the spare. The fuse provided is rated for more than one amp; choose the correct amperage fuse according to your current appliances! Package contents: You will receive 1 fuse. (Other products are not included.) Measurements are taken manually; please allow for a 1-3 cm error.The color may vary depending on the lighting; please refer to the product received. These are not original parts; please note this before purchasing.