Repair accessory kit, 17 female threaded inserts M12 x 1.5

Features:

1. The threaded screw set is placed in the screw hole of the workpiece, such as an aluminum alloy, to form a standard internal thread with high strength, wear resistance, and high precision.
2. In case of a threading error or when repairing a damaged internal threaded hole, the threaded hole can be repaired economically and efficiently using a threaded sleeve as a repair tool. The same screws can also be used after repair.
3. Applicable to high-voltage switchgear, microwave communications, automotive parts, air separation equipment, radiators, etc. Imported equipment or machine threads in inches are damaged and need to be replaced with threads in mm due to the availability of spare parts.
4. Using threaded screw sleeves to convert mm to inch threaded holes is convenient and quick.
5. With a box and sponge for safe and secure transport.

Specifications:

Item Type: Threaded Sleeve
Material: Stainless Steel
Threaded Insert Size: M12x1.5 Length: 2D

Package List:

1 x Spiral Drill Bit 1 x Tap 1 x Wrench 1 x Breakaway Pin Tool 1 x Hex Key 12" Thread Repair Insert

Note:

Instructions: Drill holes using a suitable drill bit. Use a threaded tap (special type); the tapping depth must exceed the mounting length of the threaded sleeve. Insert the threaded screw into the mounting wrench with the shank facing down. Turn the wrench handle to screw the threaded screw into the threaded hole. Use a breakaway pin tool to align the mounting handle (tail) with a hammer to strike the punch tool, and the tail handle can then be removed. If there is a problem with the threaded sleeve installation (such as a jumper), the threaded sleeve can be removed with the threading tool.