Replacement Carburetor for Honda GX140 GX168 GX200 5.5 HP and 6.5 HP Engines – Compatible with Generators, Water Pumps and Outdoor Equipment

1: Size: 19mm carburetor with choke

2: Compatible with: 168F GX120 GX160 5.5HP GX200 6.5HP engine. Replaces part number: 16100 - ZH8

3: For lawnmowers, trimmers, and pressure washers

4: Matches original equipment for a perfect fit and easy installation

5: Reminder/Note: Be sure to check the model/size before purchasing.

Features: Center mounting hole: 42mm/1.7" Core hole: 19mm/0.75" Choke hole: 24mm/0.94"

Compatible with: The carburetor fits the water pump version of the 168 Engine Motor Generator. Carburetor for Honda GX160 GX168 GX200 5.5HP 6.5HP engine. Carburetor suitable for the water pump version. The carburetor replaces part number 16100-ZH8-W61 16100-ZH7-W51 Also fits lawnmowers/generators/water pumps and other machines using the same engine model!

Here are some reasons why the new carburetor might be leaking:

1. Fuel leaks after installing a new carburetor are usually caused by old debris from the gas tank getting into the conical float valve inside the carburetor and preventing it from closing/sealing properly.

2. The second possibility is connecting the fuel line to the wrong port on the carburetor.

3. The third possibility is a defect in the float valve. The float (which is filled with air) inside the carburetor might have a small hole from the factory and has taken on gasoline. Also, the gasket on the cone might be malformed and not sealing properly.

4. The fourth One possibility could be the carburetor angle on the engine. Therefore, you will need to adjust the float level. 5. The most common problem related to the float is that the float level is set too high at the factory; this can cause instability on rough terrain or when stopped.