Replacement Extractor Blade, Compatible with NutriBullet 600w and 900w Blender Model Replacement Parts

Product DescriptionProduct Features:Item Type: NutriBullet Extractor Replacement PartsNumber of Fins: 6 Fins.Blade Material: Stainless Steel + Silicone Plastic.Blade Shape: Cross Blade.Threaded Gear: Positive Thread.Blade Color: Gray.Blade Size: 4" (Diameter) x 1.6" (Height).Blade Weight: 198 g.Compatibility:The extractor replacement blade is compatible with the NutriBullet Original 600 W and NutriBullet Pro 900 watt series.Models listed below. Number of 600 W units: NBR-0601, NBR-1201, NB-101, NB-101B, NB-101S. Number of 900 W units: NB9-1301, NB-201. Not compatible with: Extractor blade is not compatible with NutriBullet Lean extractors 1200 watts or NutriBullet RX 1700 watts, 250W Magic Bullet (MBR-1101), Nutri Ninja. Note: It is recommended to replace the extractor blades every 6 months or as needed for optimal performance. The joint may be loose during transportation, please put it firmly into the blade before use for best performance and check the bottom gear. If it is loose, please tighten it.3--Do not run your blender for more than 4 minutes at a time to avoid the blender overheating.4.Do not overfill to avoid spilling and do not add ingredients beyond the "Max" line. Please ensure the blade is seated correctly and locked tightly, replace the gasket if the blender starts leaking. Please check your blender regularly and the blade should be replaced if there is a leak or loud noise. (We do not claim that this is an original NutriBullet product. It is used only to prove the compatibility of accessories.) Package Contents: 1 x Replacement Cross Blade Emulsifier. 1 silicone rubber O-ring pre-installed in the blade.