Retractable Patio Awning - Alombra 3x2m Grey - Aluminium monobloc, manual system, width 295cm, coated polyester fabric 280g/m2, wall awning

Structure colour: Anthracite
Fabric colour: Grey

Monobloc structure with horizontal bar (valance support) in aluminium
Roller: Ø60x1.2mm, in anodised aluminium
Torsion bar: 35x35x1mm, in reinforced steel
Arms: 2 arms in aluminium, 58x29mm and 48x21mm, tensioning system by internal springs and heavy-duty coated steel cables.
Canvas: 280g/m2, in polyester coated with polyurethane, UV protection UPF50+ and water repellent.
Shade: 22cm, removable, same material as the fabric.
Doubled seams in the stressed areas
Tilt min/max: 5°/40° (screw adjustment)
Wall bracket: 2, made of cast aluminium
Hardwood fixing: 4 M10x80 screws
Concrete / solid wall mounting: 4 socket screws
Eyelet: crank on the left of the blind (in front view)

Additional information:
This product cannot be permanently deployed in order to avoid the risk of excessive wind load which could damage the product.
It is designed to be installed on a solid wall (brick, concrete), or on hardwood (walls or partitions). If you wish to install the blind in a cavity wall, you will need to use a suitable fastener (chemical, lag bolt)
The fixing kit is not designed for ceiling installation, but for wall installation only.<br/>Dimensions :

Max. folded awning: L295xW200cm (width of fabric 282cm) L295xW200cm (fabric width 282cm)
Crank length: 148cm
Min. height of awning / fixed structure: 2.50m / 3.10m