Reusable full-face respirator – Protection against organic gases and vapors – Trapezoidal filter 4 and cotton – Hazardous environments

General Description

The Reusable Full Face Respirator is designed to protect against organic gases and vapors, such as benzene, ketones, and carbon disulfide.

It is equipped with an efficient filtration system, including a trapezoidal filter housing #4 and a cotton filter, ensuring optimal protection when used in potentially hazardous environments.

Technical Specifications

Mask Type: Reusable Full Face Respirator Compatible Filters: Tank #3 (organic gases and vapors). Tank #4 (ammonia). Tank #7 (acid gases in vapor form, sulfur dioxide, chlorine, hydrogen sulfide, nitrogen oxides)

Installation

1.

Hold the end of the strap with both hands and pull the strap completely to cover your nose and mouth.

2. Connect the straps behind the neck to ensure a tight seal. 3. Pull the end of the strap again for a tighter fit. 4. Before use, check that the mask is properly sealed. Use: Immediately replace the filter housing or cotton filter if you smell an odor or if breathing resistance increases. Do not use when the oxygen concentration is below 18%. Avoid use in the presence of unknown hazardous substances or when substances reach dangerous concentrations. Prior training must be provided by a qualified person. Store the mask in a clean, sealed location when not in use.